|
Bulletin No.
|
Title
|
Type
|
Related Regulations
|
 IB12-001 |
DIRECTIVE - Pressure Piping Construction Requirements |
Information Bulletin |
|
|
IB11-020 |
Responsibility for NDE During Pressure Vessel Fabrication |
Information Bulletin |
|
|
IB11-019 |
ASME Boiler and Pressure Vessel Code - Errata and
Notices |
Information Bulletin |
|
|
IB11-018 |
Alert - Consolidated Liquid Service Pressure Relief Valves
Models 19110M and 19110H - Overrated Relieving Capacity |
Alert |
|
|
IB11-017 |
DIRECTIVE - Use of ASME Code Case 2695 in Alberta |
Information Bulletin |
|
|
IB11-016 |
Information Bulletins issued as Standata by Alberta Municipal Affairs Governing
Gas and Prssure Equipment Safety |
Information Bulletin |
|
|
IB11-015 |
Variance (VA11-011) to Section 12(1) of the Power Engineers
Regulation to modify the display of certificates of competency |
Variance |
|
|
IB11-014 |
Alert - McDonnell & Miller Model 150S Control Manual Reset Arm
Binding |
Alert |
|
|
IB11-013 |
Use of ISO 16528 in Alberta |
Information Bulletin |
|
|
IB11-012 |
A Brief Overview of Amendments to Pressure Equipment Safety Regulation |
Information Bulletin |
|
|
IB11-011 |
Variance (VA11-008) - Use of 2007 Edition (or later) ASME Section VIII Division 2 Code |
Variance |
|
|
IB11-010 |
Alert - Fatal Accident Involving a High Temperature Hydrogen Attack |
Alert |
|
|
IB11-009 (VA11-007) |
Provision of a method for owners of historical pressure equipment (traction engine boilers) |
Variance |
|
|
IB11-008 |
DIRECTIVE - Registration of pressure vessel (accumulator) which
forms part of a mechanical system on any rubber-tired, self propelled mobil
mining equipment |
Directive |
|
|
IB11-007 |
ASME CSD-1 Code |
Information Bulletin |
|
|
IB11-006 |
DIRECTIVE - Pressure Equipment Repair and Alteration Requirements |
Directive |
|
|
IB11-005 |
Alert - R&M Energy Systems Announces Product Recall of Hercules Model 150H BOP (Cap Assembly Only) |
Alert |
|
|
IB11-004
|
INTERPRETATION - To Pressure Equipment Safety
Regulation (PESR) Section 6(b) with respect to mechanical refrigeration systems
with prime mover rating of 125 kW or less and tested and certified under Clause
5.2 of CSA B52-05 |
Interpretation |
PESR |
|
IB11-003 |
DIRECTIVE - Piping Submission Form AB-96 Updated |
Directive |
|
|
IB11-002 |
DIRECTIVE to Grade C Pressure Welder Certification |
Directive |
Pressure Welders Reg |
|
IB11-001
|
INTERPRETATION - To Sections 16(1)(b)(i),(ii) and 1(1)(b)(i),(ii) of the Power Engineers Regulation |
Interpretation |
Power Engineers Reg |
|
IB10-006
Rev2 |
DIRECTIVE - ABSA Requirements for Steam Pipelines |
Directive |
|
|
IB10-006
Rev1 |
SUPERSEDED by IB10-006 Rev2 |
Directive |
|
|
IB10-006 |
SUPERSEDED by IB10-006 Rev1 |
Directive |
|
|
IB10-005 |
INTERPRETATION - National Board Registration of Cast Iron Sectional
Boilers Constructed Outside of Canada |
Interpretation |
|
|
IB10-004 |
INTERPRETATION - Rubber Hose Assemblies Manufactured in accordance
with Rubber Manufacturers Association RMA IP-2 |
Interpretation |
|
|
IB10-003 |
ALERT - Fatal Accident Involving a Truck-Mounted Water Tank |
Alert |
|
|
IB10-002 |
ALERT - Chemical Cleaning Unit Operated as a Boiler |
Alert |
|
|
IB10-001 |
VARIANCE (VA10-008) - Acceptance of ASME Code Case 2638 for Alternative
Piping Calibration Blocks for use in Alberta |
Variance |
|
|
IB09-010 |
INTERPRETATION - Pipe Expanders |
Interpretation |
|
|
IB09-009 |
Use of Finite Element Analysis (FEA) to Support a Pressure Equipment
Design Submission |
Information Bulletin |
|
|
IB09-008 |
Alert - Pumpkin Guns |
Alert |
|
|
IB09-007 |
Alert - H2S Removal at Well Site, Non-Pressure Vessels Must Not be
Pressurized |
Alert |
|
|
IB09-006 |
Unfinished Projects - A Heads up on Documentation Requirements |
Information Bulletin |
|
|
IB09-005 |
Design Registration and Certificate of Inspection Permits for Hot Water
Storage Tanks and Heaters |
Information Bulletin |
|
|
IB09-004 |
Alert - Expiry of CC2575 |
Alert |
|
|
IB09-003 |
SUPERSEDED by IB11-011 Variance - Use of 2007 Edition ASME Section VIII Division 2 Code |
Variance |
|
|
IB09-002 |
Alert - Freezing Hazard |
Alert |
|
|
IB09-001 |
Directive - Interpretation of non-destructive examination requirements
of welds using the Submerged Arc Welding (SAW) process for 2-1/4Cr-1Mo-V vessels |
Directive |
|
|
IB08-004 |
Alert - Worker Killed at Pressure Plant |
Alert |
|
|
IB08-003 |
Directive - Use of an Electronic Log Book |
Information Bulletin |
|
|
IB08-002 |
Variance to provide options for addressing Building Operator A, Building
Operator B and Fireman's Certificates of Competency after they have expired |
Variance |
|
|
IB08-001 |
Information Bulletin - Use of Part UHX of ASME Section VIII, Division
1 |
Information Bulletin |
|
|
IB07-010 |
Information Bulletin - Manufacturers of ASME Section VIII, Div. 2 Vessels |
Information Bulletin |
|
|
IB07-009 |
Directive - Interpretation of Code Requirements in Para UG-84 Relative
to the Determination of the Number of Vessel (Production) Impact Test Plates Required |
Directive |
|
|
IB07-008 |
Information Bulletin - Code Requirements for Propane Fuel Tanks |
Information Bulletin |
|
|
IB07-007 |
SUPERSEDED by IB09-003 - Variance for Use of 2007
Edition ASME Section VIII Division 2 Code -
(Taskforce Report) |
Variance |
|
|
IB07-006 |
Directive - Allowance for and Report of Local Thin Areas (LTA's) in
Pressure Vessel Shells |
Directive |
|
|
IB07-005-R1 |
Directive - NPS2 Class 3000 Threaded Couplings |
Directive |
|
|
IB07-005 |
SUPERSEDED by IB07-005-R1 |
Directive |
|
|
IB07-004 |
Alert - Jordair Coalescer Filter Canister on Model K401 Air Compressor |
Alert |
|
|
IB07-003-R1 |
SUPERSEDED by IB07-005 |
Alert |
|
|
IB07-003 |
SUPERSEDED by IB07-003-R1 |
Alert |
|
|
IB07-002 |
Interpretation - Random Radiography for a Designated Lot of ASME B31.3
Piping |
Interpretation |
|
|
IB07-001 |
Plant Process Safety - (The
Baker Panel Report) |
Information Bulletin |
|
|
IB06-003 |
Alert - Air/Gas Dryer Vessel Failures |
Alert |
|
|
IB06-002 |
SUPERSEDED by IB11-002 - DIRECTIVE to Grade C Pressure Welder Certification |
Directive |
Pressure Welders Reg |
|
IB06-001 |
DIRECTIVE - Exemption from Annual Fees |
Directive |
|
|
IB05-008 |
RESCINDED - covered by PESR - Variance to Section
2(2)(c) of the Design, Construction and installation of Boilers and Pressure Vessels
Regulations (AR227/1975) |
Variance |
Design, Construction & Installation Reg |
|
IB05-007 |
Interpretation to Sections 4(3)(b) and 4(4) of the Power Engineers
Regulation (AR 85/2003) |
Interpretation |
Power Engineers Reg |
|
IB05-006 |
RESCINDED - covered by PESR - Variance to Section
5(1) of the Design, Construction and installation of Boilers and Pressure Vessels
Regulations (AR227/1975) |
Variance |
Design, Construction & Installation Reg |
|
IB05-005 |
A discussion of Area Replacement Method in Opening Reinforcement Design
and Use of Directive IB05-004 Rev.1 |
Info |
|
|
IB05-004
Rev.1 |
WITHDRAWN Directive - Split Reinforcing Pads |
Directive |
|
|
IB05-004 |
SUPERSEDED by IB05-004 Rev.1 |
Directive |
|
|
IB05-003 |
Alert - Accumulator (Cylinder) Failure |
Alert |
|
|
IB05-002 |
Alert - Pressurized Truck-Mounted Vessels |
Alert |
|
|
IB05-001 |
RESCINDED - covered by CSA Z662.07 Annex I - Variance
to Section 5(1) of the Design, Construction and installation of Boilers and Pressure
Vessels Regulations (AR227/1975) |
Variance |
Design, Construction & Installation Reg |
|
IB04-007 |
Notification - Printing Errors for 2004 Edition of the ASME Code |
Info |
|
|
IB04-006 |
RESCINDED - Use of Materials in Inventory (supersedes
IB04-001) |
Info |
|
|
IB04-005 |
Safety Alert to Pressure Equipment Owners and Operators - Valve Failure |
Alert |
|
|
IB04-004 |
DIRECTIVE - Movement of Tanks Not Designed for Transportation or Delivery
of Propane |
Directive |
|
|
IB04-003 |
ALERT to Pressure Equipment Owners and Operators - Rig Boiler Fatality |
Alert |
|
|
IB04-002 |
ALERT - Brass Ball Valve Failure in Power Boiler Service |
Alert |
|
|
IB04-001 |
SUPERSEDED by IB04-006 - Expiry of Code Case
2053 |
|
|
|
IB03-010 |
Variance - Use of ASME Section VIII, Division 1, Part UHX |
Variance |
Design, Construction & Installation Reg. |
|
IB03-009 |
RESCINDED- covered by PESR - Variance to Sections
16-19 of the Design, Construction and Installation of Boilers and Pressure Vessels
Regulations (AR227/1975)
(to allow central registration of fittings) |
Variance |
Design, Construction & Installation Reg. |
|
IB03-008
Rev.2 |
Interpretation to Sections 19(7)(a); 2(2)(a); 18(1)(b)(i); Table 3;
20(1)(a); . . . . of the Power Engineers Regulation (AR 85/2003) |
Interpretation |
Power Engineers Reg. |
|
IB03-008
Rev.1 |
REPLACED by IB03-008 Rev.2 - Interpretation to Sections 19(7)(a);
2(2)(a); 18(1)(b)(i); Table 3; 20(1)(a); . . . . of the Power Engineers Regulation
(AR 85/2003) |
|
|
|
IB03-008 |
REPLACED by IB03-008 Rev.1 - Interpretation to Sections 18(7(a);
2(2)(a); 18(1)(b)(i); Table 3; . . . . of the Power Engineers Regulation (AR 85/2003) |
|
|
|
IB03-007
Rev.1 |
Directive - CSA B52 Clause 6.10 Emergency Discharge and Annex B Guideline |
Directive |
|
|
IB03-007 |
Superseded by IB03-007 Rev.1 - Directive, CSA B52 Clause 5.10
Emergency Discharge and Appendix B Guideline |
Directive |
|
|
IB03-006 |
Rescinding Variance VA03-005 (IB03-004) |
Info |
|
|
IB03-005 |
Variance to Section 5(1) of the Design, Construction and Installation
of Boilers and Pressure Vessels Regulations (AR 227/1975) |
Variance |
Design, Construction & Installation Reg |
|
IB03-004 |
RESCINDED - VA03-005 Variance to Section 20(1) of the Power
Engineers Reg |
|
|
|
IB03-003 |
SUPERSEDED by IB06-001 - DIRECTIVE - Exemption
from Annual Fees |
Directive |
|
|
IB03-002 |
RESCINDED- covered by PESR - VARIANCE to Section 4(1)
of the Design, Construction and Installation of Boilers and Pressure Vessels Regulations
(AR 227/1975) |
Variance |
Design, Construction & Installation Reg |
|
IB03-001
Rev1 |
VARIANCE - Equivalency to Sections 4(2) and 9(1) of the Pressure Welders Regulation
(AR 169/2002)
|
Variance |
Pressure Welders Reg |
|
IB03-001 |
SUPERSEDED by IB03-001 Rev.1- VARIANCE, Equivalency to Sections 4(2)
and 9(1) of the Pressure Welders Regulation (AR 169/2002)
|
|
|
|
IB02-007 |
NO LONGER APPLICABLE - VARIANCE - Equivalency to Section 6 of the Pressure
Welders Regulation (AR169/2002)
|
Variance |
Pressure Welders Reg |
|
IB02-006 |
ASME Code requirements regarding the use of SI units in pressure equipment design
registration and shop construction
|
Info |
|
|
IB02-005 |
ALERT - Proposal for Mandatory ASME Requirements for Tubular Heat Exchangers
|
Alert |
|
|
IB02-004 |
ALERT - Air compressor with air receiver tank
|
Alert |
|
|
IB02-003 |
Consumer Alert - Ingersoll-Rand announces recall of portable air compressors
|
Alert |
|
|
IB02-002
Rev.1, 200508 |
DIRECTIVE - Certification of In-Service Pressure Equipment Inspectors
|
Directive |
|
|
IB02-002,
200202 |
SUPERSEDED by IB02-002 Rev.1 - DIRECTIVE - Certification of In-Service
Pressure Equipment Inspectors
|
Directive |
|
|
IB02-001 |
ALERT - Pipe Nipple Failures
|
Alert |
|
|
IB01-005 |
Design Factor of 3.5 and the ASME Code 2001 Edition for use in the Province of Alberta
|
Info |
|
|
IB01-004 |
INTERPRETATION - Definition of pressure vessel with respect to gas-insulated switchgear
and controlgear
|
Interpretation |
|
|
IB01-003 |
Certificate of Inspection Not Required for Pressurized Cargo Transport Vessels Under
the Alberta Safety Codes Act
|
Info |
|
|
IB01-002 |
Exemption of Pressurized Cargo Transport Vessels from the Provisions of the Alberta
Safety Codes Act
|
Exemption |
|
|
IB01-001 |
NO LONGER VALID - Variance to the Design, Construction and Installation
of Boilers and Pressure Vessels Regulations regarding existing pressure vessels (field
tanks) in Alberta |
|
|
|
IB00-003 |
NO LONGER VALID - Variance to Section 38(3) of Design, Construction
and Installation of Boilers and Pressure Vessels Regulations (AR227/75) with amendments
up to and including AR159/97) |
|
|
|
IB00-002 |
Alert to Pressure Equipment Owners - "Mole Sieve" Type Pressure Vessel
|
Alert |
|
|
IB00-001 |
Alert to Plant Owners - Yale 6" Closures
|
Alert |
|
|
IB99-003 |
Warning - Oil Battery Operation
|
Alert |
|
|
IB99-002 |
Alert to Owners/Operators of Refineries and Plants where Cokers are used
|
Alert |
|
|
IB99-001 |
Design Factor of 3.5 and the ASME Code 1998 Edition with 1999 Addenda
|
Info |
|
|
IB98-005
Rev.1 |
NO LONGER VALID - Application of ASME Code Cases 2274, 2278
& 2290 for use in Alberta |
|
|
|
IB98-005 |
NO LONGER VALID - Application of Proposed ASME Code Cases 2274,
2278 & 2290 for use in Alberta |
|
|
|
IB98-004 |
Exemption of Impact Testing of Welds for WPQ
|
Exemption |
|
|
IB98-003 |
Mixed Steel: 4" A234 WPB Buttweld Fittings
|
Info |
|
|
IB98-002 |
NO LONGER VALID - Application of Proposed ASME Code Cases 2274
& 2278 for use in Alberta |
|
|
|
IB98-001 |
NO LONGER VALID - Proposed Code Cases 2274 and 2278 |
|
|
printer friendly version